
106 | 3Com Router 5000/6000 Family |
| Command Reference |
ospf
Use the ospf command to enable the OSPF protocol.
System view
ospf
Use the ospf
Interface view
ospf cost
Use the ospf cost command to configure different packet sending costs so as to send packets from different interfaces.
Interface view
ospf
Use the ospf
Interface view
ospf
Use the ospf
System view
ospf
Use the ospf
Interface view
ospf
Use the ospf
Interface view
ospf timer dead
Use the ospf timer dead command to configure the dead interval of the OSPF neighbor.
Interface view
ospf timer hello
Use the ospf timer hello command to configure the interval for transmitting Hello messages on an interface.
Interface view
ospf timer poll
Use the ospf timer poll command to configure the poll Hello message interval on nbma and p2mp network.
Interface view
ospf timer retransmit
Use the ospf timer retransmit command to configure the interval for LSA
Interface view
ospf
Use the ospf
Interface view
ospf vpn instance
Use the ospf command to enable an OSPF process.
System view
option
Use the option command to specify the logical relationship between the addresses to be probed in the detect group.
Detect Group view
outband
Use the outband command to configure transmission of DTMF code in the outband mode.
Voice Entity view
outband vofr
Use the outband vofr command to configure
Voice Entity view
overlap voip h323
Use the overlap voip h323 command to configure the calling party to support h323 overlap mode for sending numbers.