70 | 3Com Router 5000/6000 Family |
| Command Reference |
flag
Use the flag command to set the overhead byte of SONET/SDH frames.
CPOS Interface view
flag
Use the flag command to set the SDH overhead byte.
POS Interface view
flow control
Use the
Ethernet Interface view
Use the
Ethernet Port view
Use the
User Interface view
flow interval
Use the
System view
Use the
System view
Use the
System view
Use the
GE Interface view
Use the
R2 CAS view
format
Use the format command to format a storage device.
User view
fqdn
Use the fqdn command to specify the FQDN of an entity.
PKI Entity view
fr bump
Use the fr bump command to configure the standby PVC that will take over when a specified PVC goes down.
FR Pvc-Group view
Use the
Frame Relay DLCI view
fr class
Use the fr class command to create a frame relay class and enter frame relay class view.
System view
fr compression frf9
Use the fr compression frf9 command to enable the FRF9 compression function.
Frame Relay Interface view
fr compression iphc
Use the fr compression iphc command to enable the IP header compression.
Frame Relay Interface view
