3Com 5000/6000 manual Use the igmp enable command to enable Igmp on an interface

Models: 5000/6000

1 162
Download 162 pages 60.87 Kb
Page 79
Image 79

3Com Router 5000/6000 Family

79

Command Reference

 

if-matchmpls-exp

Use the if-matchmpls-expcommand to configure the matching rule for EXP domain of MPLS.

Class view

if-matchmpls-label

Use the if-matchmpls-labelcommand to configure to match public network routes with MPLS labels only.

Route-Policy view

if-matchoutbound-interface

Use the if-matchoutbound-subinterfacecommand to define an outbound subinterface matching rule for the class.

Class view

if-match packet length

Use the if-matchpacket-lengthcommand to set length match conditions of IP packets.

Route-Policy view

if-match protocol

Use the if-match protocol command to define protocol matching rules.

Class view

if-match protocol rtp

Use the if-match protocol rtp command to configure RTP matching rules.

Class view

if-match rtp

Use the if-match rtp command to define port match rule of RTP.

Class view

if-match tag

Use the if-match tag command to match the tag field of OSPF route information.

Routing Policy view

igmp enable

Use the igmp enable command to enable IGMP on an interface.

Interface view

igmp group-limit

Use the igmp group-limitcommand to limit the number of IGMP groups joined on the interface. If the number exceeds the limit, the router will not process the joined IGMP packet any more.

Interface view

igmp group-policy

Use the igmp group-policycommand to set the filter of multicast groups on an interface to control the accessing to the IP multicast groups.

Interface view

igmp host-join

Use the igmp host-joincommand to enable an interface of a router to join a multicast group.

Interface view

igmp lastmember-queryinterval

Use the igmp lastmember-queryintervalcommand to set the interval at which IGMP querier sends the

IGMP specified group query packet when it receives IGMP Leave packet from the host.

Interface view

igmp max-response-time

Use the igmp max-response-timecommand to configure the maximum response time contained in the

IGMP query packet.

Interface view

igmp proxy

Use the igmp proxy command to specify an interface of a leaf network router as the IGMP proxy of another interface.

Interface view

igmp robust-count

Use the igmp robust-countcommand to set the times IGMP querier sends the IGMP specified group query packet when it receives IGMP Leave packet from the host.

Interface view

Page 79
Image 79
3Com 5000/6000 manual Use the igmp enable command to enable Igmp on an interface