3Com 5000/6000 manual Display ip policy

3Com Router 5000/6000 Family	47
Command Reference

display ip policy

Use the display ip policy command to view the routing policies of local and configured interface policy routings.

Any view

display ip policy setup

Use the display ip policy setup command to view the setting information of policy routings.

Any view

display ip policy statistic

Use the display ip policy statistic command to view the statistics of policy routings.

Any view

display ip routing-table

Use the display ip routing-tablecommand to view the routing table summary.

Any view

display ip routing-table acl

Use the display ip routing-table acl command to view the route filtered through specified basic access control list (ACL).

Any view

display ip routing-table ip_address

Use the display ip routing-tableip_address command to view the routing information of the specified destination address.

Any view

display ip routing-table ip_address1 ip_address2

Use the display ip routing-tableip_address1 ip_address2 command to view the routing information in the specified destination address range.

Any view

display ip routing-tableip-prefix

Use the display ip routing-tableip-prefixcommand to view the route that passed the filtering rule according to the specified ip prefix list.

Any view

display ip routing-table protocol

Use the display ip routing-table protocol command to view the routing information of specified protocol.

Any view

display ip routing-table radix

Use the display ip routing-table radix command to view the routing table information in a tree structure.

Any view

display ip routing-table statistics

Use the display ip routing-table statistics command to view the integrated routing information.

Any view

display ip routing-table verbose

Use the display ip routing-table verbose command to view the verbose routing table information.

Any view

display ip routing-tablevpn-instance

Use the display ip routing-tablevpn-instancecommand to view RIP information associated with vpn instance address family.

Any view

display ip routing-tablevpn-instance

Use the display ip routing-tablevpn-instancecommand to view the specified information in the IP routing table of vpn-instance.

Any view

display ip socket

Use the display ip socket command to display the information about all sockets in the current system.

Any view

display ip statistics

Use the display ip statistics command to view IP traffic statistics information. This command is used to display such statistics information as IP packet transmit/receive, packet assembly/disassembly, which is helpful to fault diagnosis.

Any view