3Com 5000/6000 manual FXO Voice Subscriber-Line view, FXS Voice Subscriber-Line View

136	3Com Router 5000/6000 Family
	Command Reference

send-busytone

Use the send-busytonecommand to enable busy tone sending on the FXO interface.

FXO Voice Subscriber-Line view

send-number (in Voice Entity View)

Use the send-numbercommand to configure the number sending mode.

POTS Voice Entity view

send-number (in Voice Subscriber-Line View)

Use the send-numbercommand to configure the FXS voice subscriber-line to allow the FXS to send called numbers.

FXS Voice Subscriber-Line View

send-ring

Use the send-ringcommand to enable the local end to play ringback tone.

VoIP Voice Entity view

send-trap

Use the send-trapcommand to configure the type of events that trigger trap sending.

HWPing Test Group view

sendat

Use the sendat command to manually send AT command to the modem.

Interface (Asynchronous Serial Interface, AUX Port, or AM Interface) view

sendloopcode

Use the sendloopcode command to send the remote loopback control code.

CT1/PRI Interface view

sendpacket passroute

Use the sendpacket passroute command to enable routing table bypass.

HWPing Test Group view

sendring

Use the sendring command to enable or disable the terminating point to send ring-back tone or busy tone signal to the calling party.

R2 CAS view

seq-number

Use the seq-numbercommand to enable voice packets transmitted on the local gateway to carry sequence numbers.

Voice Entity view

server type

Use the server-typecommand to configure the RADIUS server type supported by the router.

RADIUS view

service cbr

Use the service cbr command to specify PVC service type as constant bit rate (CBR).

PVC view

service data

Use the service data command to enable data call service.

Voice Entity view

service modem-callback

Use the service modem-callbackcommand to enable the callback function of modems.

System view

service type

Use the service-typecommand to configure a service type for a particular user.

Local User view

service-type ftp

Use the service-type ftp command to specify a directory accessible for the FTP user.

Local User view

service-type ppp

Use the service-typecommand to configure the callback attribute and caller number of the PPP user.

Local User view

service ubr

Use the service ubr command to specify the service type of PVC as Unspecified Bit Rate (UBR) and specify the related rate parameters.

PVC view