3Com 5000/6000 manual Mobile-ip tunnel path-mtu-discovery

3Com Router 5000/6000 Family	99
Command Reference

mobile-ip tunnel path-mtu-discovery

Use the mobile-ip tunnel path-mtu-discoverycommand to set the PMTU update policy.

System view

mobile-ipvirtual-network

Use the mobile-ipvirtual-networkcommand to define a virtual network.

System view

mobile-network

Use the mobile-networkcommand to configure a mobile network for an MR.

HA-MR view

mobile-network

Use the mobile-networkcommand to configure a mobile network for the MR.

MR view

mobile-node

Use the mobile-nodecommand to set MN attributes, including the interface or virtual network and the registration lifetime.

System view

mode

Use the mode command to configure the R2 signaling mode in a country or region.

R2 CAS view

mode (SIP Client view)

Use the mode command to set the registration mode of the gateway.

SIP Client view

modem

Use the modem or modem both command to allow modem calls to pass through, both incoming and outgoing.

Use the modem [ call-in call-out ] command to allow incoming or outgoing modem calls to pass through.

User Interface view

modem adapt no-waiting-connect

Use the modem adapt no-waiting-connectcommand to set the asynchronous serial interface Modem to switch from IDLE to ACTIVE without waiting for receiving the signal CONNECT (a signal used for a physical modem to negotiation rate) after it receives CD_UP (a lower layer detects carrier signal).

User Interface view

modem auto-answer

Use the modem auto-answercommand to have the external modem connected to the asynchronous interface automatically answer or hook off.

User Interface view

modem auto-answer

Use the modem auto-answercommand to set the answering mode to auto-answer.

User Interface view

modem compatible-param

Use the modem compatible-paramcommand in the case that you fail to use standard Modem PCM to interoperate with devices from other vendors.

Voice Entity view

modem protocol

Use the modem protocol none protocol to disable Modem function for single voice entity.

Use the modem protocol pcm command to configure PCM Modem protocol type for single voice entity, including coding/decoding and Modem negotiation mode.

Voice Entity view

modem timer answer

Use the modem timer answer command to set the timeout time spent waiting for the carrier signal after the off-hook action when setting up an incoming call connection.

User Interface view.

monitor-port

Use the monitor-portcommand to specify the current port as the monitoring port

Ethernet Interface view

more

Use the more command, you can view the contents of the specified file.

User view