116

3Com Router 5000/6000 Family

 

Command Reference

pppoe-client

Use the pppoe-clientcommand to establish a PPPoE session and specify the Dialer Bundle corresponding to the session.

Ethernet Interface (subinterface) view

Virtual Ethernet Interface view

pppoe-server bind virtual-template

Use the pppoe-server bind virtual-templatecommand to enable PPPoE on the virtual-template specified by the Ethernet interface.

Interface view

pppoe-serverlog-information off

Use the pppoe-serverlog-information off command to enable the PPPoE server to output the

PPP-related log information.

System view

pppoe-servermax-sessionslocal-mac

Use the pppoe-servermax-sessionslocal-maccommand to set the maximum number of PPPoE sessions that can be established at a local MAC address.

System view

pppoe-servermax-sessionsremote-mac

Use the pppoe-servermax-sessionsremote-maccommand to set the maximum number of PPPoE sessions that can be established at a peer MAC address.

System view

pppoe-servermax-sessions total

Use the pppoe-servermax-sessions total command to set the maximum number of PPPoE sessions that the system can establish.

System view

pq

Use the pq command to set the queue type of frame relay virtual circuit as Priority Queuing.

Frame Relay Class view

pre-shared-key

Use the pre-shared-keycommand to set the pre-shared key used when a client needs to authenticate a

DVPN server.

Dvpn-Class view

pre-shared-key

Use the pre-shared-keycommand to configure a pre-shared key to be used in IKE negotiation.

IKE-Peer view

preference

Use the preference command to configure the preference of BGP protocol.

BGP Protocol view

BGP Multicast Address Family view

preference

Use the preference command to configure the preference of IS-IS protocol.

IS-IS view

preference

Use the preference command to configure the preference of an OSPF protocol route.

OSPF view

preference

Use the preference command to configure the route preference of RIP.

RIP view

preference clns

Use the preference clns command to set the preference of the CLNS routes discovered by IS-IS protocol.

IS-IS view

pri-set

Use the pri-setcommand to bundle timeslots on the CT1/PRI or CE1/PRI interface into a pri-set.

CE1/PRI Interface view

CT1/PRI Interface view

pri-set (CE1/PRI Interface)

Use the pri-setcommand to have timeslots on the CE1/PRI interface form a pri-set.

CE1/PRI Interface view

Page 116
Image 116
3Com 5000/6000 manual BGP Protocol view BGP Multicast Address Family view, CE1/PRI Interface view CT1/PRI Interface view