3Com manual 3Com Router 5000/6000 Family 111 Command Reference, BSV Interface view in NTmode

3Com Router 5000/6000 Family	111
Command Reference

peer timer

Use the peer timer command to configure Keepalive and Holdtime intervals for a peer (group).

BGP view

peer upe

Use the peer upe command to configure BGP peer as the UPE of hierarchical BGP/MPLS VPN.

BGP view

permanent-active

Use the permanent-activecommand to configure BSV interfaces to permanent active.

BSV Interface view (in NTmode)

pfs

Use the pfs command to set the Perfect Forward Secrecy (PFS) feature for the IPSec policy to initiate the negotiation.

IPSec Policy view

IPSec Policy Template view

phy-mru

Use the phy-mrucommand to configure in asynchronous flow mode MRU at the physical layer.

Asynchronous Serial Interface view

physical-mode

Use the physical-modecommand to set the operating mode of the synchronous/asynchronous serial interface.

Serial Interface view

pim

Use the pim command to enter PIM view.

System view

pim bsr-boundary

Use the pim bsr-boundarycommand to configure an interface to become the PIM domain boundary.

Interface view

pim dm

Use the pim dm command to enable PIM-DM.

Interface view

pim neighbor-limit

Use the pim neighbor-limitcommand to limit PIM neighbor number on an router interface. If the number exceeds the limit configured, no new neighbor can be added to the router.

Interface view

pim neighbor-policy

Use the pim neighbor-policycommand to configure a router to filter the PIM neighbor of the current interface.

Interface view

pim sm

Use the pim sm command to enable PIM-SM protocol on an interface.

Interface view

pim timer hello

Use the pim timer hello command to configure the interval for sending PIM router Hello messages.

Interface view

ping

Use the ping command to test connectivity of an IP network and reachability of a host.

Any view

ping clns

Use the ping clns command to test the reachability to a specified destination.

Any view

ping ipx

Use the ping ipx command to check host reachability and network connectivity in IPX network.

Any view

pki delete-certificate

Use the pki delete-certificatecommand to delete the locally stored certificates.

System view