3Com 5000/6000 manual Dtmf threshold

64	3Com Router 5000/6000 Family
	Command Reference

dtmf threshold

Use the dtmf threshold command to configure the sensitivity of DTMF digit detection.

Voice Subscriber-Line view

duplex

Use the duplex command to set the operating mode of the Ethernet interface.

Ethernet Interface view

duplex

Use the duplex command to configure the duplex mode of the Ethernet port.

Ethernet Port view

dvpn class

Use the dvpn class command to create and enter a dvpn-class view.

System view

dvpn client register-dumb

Use the dvpn client register-dumbcommand to set the time when a client turns to dumb state after it fails to register with a DVPN server for specified retries.

System view

dvpn client register-interval

Use the dvpn client register-intervalcommand to set the register interval of a client.

System view

dvpn client register-retry

Use the dvpn client register-retrycommand to set the maximum retries for a client to register with a

DVPN server continuously.

System view

dvpn dvpn-id

Use the dvpn dvpn-idcommand to specify the DVPN domain the tunnel interface belongs to. This command is valid when the tunnel interface is encapsulated as DVPN.

Tunnel Interface view

dvpn interface-type

Use the dvpn interface-typecommand to specify the type of a tunnel interface. A tunnel interface is of client type by default.

Tunnel Interface view

dvpn policy

Use the dvpn policy command to create and enter a DVPN policy view.

System view

dvpn policy

Use the dvpn policy command to apply a specified DVPN policy to a tunnel interface that is of server type.

Tunnel Interface view

dvpn register-type

Use the dvpn register-typecommand to configure the type of the additional information when a client registers with a DVPN server.

Tunnel Interface view

dvpn security

Use the dvpn security acl command to configure the ACL used for deciding which data stream needs

IPSec encryption on the tunnel interface.

Tunnel Interface view

dvpn server

Use the dvpn server command to configure the DVPN class to be applied to a tunnel interface.

Tunnel Interface view

dvpn server authentication-client method

Use the dvpn server authentication-client method command to specify the default way a DVPN server authenticates clients.

System view

dvpn server map age-time

Use the dvpn server map age-timecommand to set the map age time of a DVPN server.

System view

dvpn server pre-shared-key

Use the dvpn server pre-shared-keycommand to set a pre-shared key for a DVPN server.

System view