
160 | 3Com Router 5000/6000 Family |
| Command Reference |
x25
Use the x25
System view
x25 switch pvc
Use the x25 switch pvc (packet switching) command to configure one PVC route.
Interface view
x25 switch svc
Use the x25 switch svc
System view
x25 switch svc interface
Use the x25 switch svc interface command to add an X.25 switching route whose forwarding address is a serial interface or Annex G DLCI.
System view
x25 switch svc xot
Use the x25 switch svc xot command to add an X.25 switching route whose forwarding address is XOT channel.
System view
x25 switching
Use the x25 switching command to enable the X.25 switching function.
System view
x25 template
Use the x25 template command in system view to create an X.25 template and in DLCI view to reference the template.
System view
DLCI view
x25 timer hold
Use the x25 timer hold command to set the delay to send calls to a destination with failed calls.
Interface view
x25 timer idle
Use the x25 timer idle command to set the maximum idle time of the SVC on the interface.
Interface view
x25 timer tx0
Use the x25 timer tx0 command to set the restart/retransmission timer delay for DTE (or DCE).
Interface view
x25 timer tx1
Use the x25 timer tx1 command to set calling request (indication) transmission timer delay for DTE (or
DCE).
Interface view
x25 timer tx2
Use the x25 timer tx2 command to set resetting request (indication) transmission timer delay for DTE (or
DCE).
Interface view
x25 timer tx3
Use the x25 timer tx3 command to set clearing request (indication) transmission timer delay for DTE (or
DCE).
Interface view
x25
Use the x25
Interface view
x25
Use the x25
Interface view
x25
Use the x25