3Com Router 5000/6000 Family | 107 |
Command Reference |
|
packing timer
Use the
PVC view
pad
Use the pad command to establish a PAD connection with the remote site.
User view
Use the
Synchronous Serial Interface view
parity
Use the parity command to set the check bit of the user interface.
User Interface view
passive
Use the passive command to set data transmission mode to passive.
FTP Client view
password
Use the password command to configure the password required for logging onto the FTP server.
HWPing Test Group view
password
Use the password command to configure a password for a local user.
Local User view
Use the
Voice Access-Number view
Use the
Voice Entity view
pcm
Use the pcm command to configure a companding law used for quantizing signals.
Voice Subscriber-Line view
peer
Use the peer command to configure the destination address of the peer to which information is sent in unicast mode.
RIP view
peer
Use the peer command to configure an MSDP peer.
MSDP view
peer
Use the peer command to configure the IP address of adjacent routers and specify a DR priority on an
NBMA network.
OSPF view
peer
Use the peer command to configure the subnet type in IKE negotiation.
IKE-Peer view
peer
Use the peer
BGP view
VPNv4 view
VPN Instance view
peer
Use the peer
