3Com Router 5000/6000 Family | 67 |
Command Reference |
|
esp
Use the esp
IPSec Proposal view
Use the
IKE-Peer view
execute
Use the execute command to execute the specified batch file.
System view
exit
Use the exit command to terminate the connection to the remote SFTP server and exit to system view as you would with the bye and quit commands.
SFTP Client view
expired
Use the expired command to configure a valid period allowed for leasing IP addresses in a global DHCP address pool.
DHCP Address Pool view
Use the
VoIP Voice Entity view
fax baudrate
Use the fax baudrate command to configure the highest fax baudrate enabled by the gateway.
Voice Entity view
fax ecm
Use the fax ecm command to configure the forced adoption of ECM mode at the gateway, that is, to make the facsimiles at both ends support ECM mode.
Voice Entity view
fax level
Use the fax level command to configure the gateway carrier transmitting energy level.
Voice Entity view
fax
Use the fax
Voice Entity view
fax
Use the fax
Voice Entity view
fax protocol
Use the fax protocol command to configure the protocol for intercommunication with other devices or enable the fax Passthrough mode, and configure the number of redundant packets sent via the T.38 fax protocol. The argument
Voice Entity view
fax
Use the fax
Voice Entity view
fax
Use the fax
Voice Entity view
fdl
Use the fdl command to set the behavior of the CT1/PRI interface on the FDL in ESF framing.
CT1/PRI Interface view
fe1 clock
Use the fe1 clock command to configure clocking on the
E1-F Interface view
fe1 code
Use the fe1 code command to configure the line code format of the
