158 | 3Com Router 5000/6000 Family |
| Command Reference |
web url-filter parameter delete
Use the web url-filter parameter delete command to delete a filter keyword previously added.
web url-filter parameter delete-all
Use the web url-filter parameter delete-allcommand to delete all filter keywords.
web url-filter parameter enable
Use the web url-filter parameter enable command to enable URL parameter filtering.
web url-filter parameter load-file
Use the web url-filter parameter load-filecommand to load a URL parameter filtering file.
web url-filter parameter save-file
Use the web url-filter parameter save-filecommand to save a URL parameter filter file.
wfq
Use the wfq command to set the queue type of the VC to be WFQ.
wildcard-register enable
Use the wildcard-register enable command to enable fuzzy (wildcard) telephone number registration.
wred
Use the wred command to configure drop mode as weighted random early detection (WRED).
wred dscp
Use the wred dscp command to set DSCP lower-limit, upper-limit and drop probability denominator of
WRED.
wred ip-precedence
Use the wred ip-precedencecommand to set precedence lower-limit, upper-limit and drop probability denominator of WRED.
wred weighting-constant
Use the wred weighting-constantcommand to set exponential for the calculation of average queue length by WRED.
x25 alias-policy
Use the x25 alias-policycommand to configure the alias of an X.121 address.
x25 call-facility
Use the x25 call-facilitycommand to set user options for an X.25 interface. After an option is set, all
X.25 calls from the X.25 interface will carry the relevant information field in call packet.
x25 cug-service
Use the x25 cug-servicecommand to enable CUG service and suppression policies.
x25 default-protocol
Use the x25 default-protocolcommand to set the default upper-layer protocol carried over X.25 for the
X.25 interface.
x25 default-protocol
Use the x25 default-protocolcommand to set the upper layer protocol for an X.25 interface that X.25 protocol carries by default.
x25 hunt-group
Use the x25 hunt-groupcommand to create or enter an X.25 hunt group.
