3Com manual 3Com Router 5000/6000 Family 101 Command Reference, Remote-Peer view System view

3Com Router 5000/6000 Family	101
Command Reference

mpls ldp path-vectors

Use the mpls ldp path-vectorscommand to set the maximum value of path vector.

System view

mpls ldp remote-peer

Use the mpls ldp remote-peercommand to create a remote-peer entity and enter remote-peer view.

Remote-Peer view

System view

mpls ldp reset-session

Use the mpls ldp reset-sessioncommand to reset a specified session on an interface.

Interface view

mpls ldp timer

Use the mpls ldp timer command to set the duration of a Hello hold timer or session hold timer.

Interface view

Remote-Peer view

mpls ldp transport-ip

Use the mpls ldp transport-ipcommand to configure an LDP session transport address.

Interface view

mpls lsr-id

Use the mpls lsr-idcommand to configure an LSR ID.

System view

mpls static-l2vc

Use the mpls static-l2vccommand to create an SVC MPLS L2VPN connection.

Interface view

msdp

Use the msdp command to enable MSDP and enter the MSDP view.

System view

msdp-tracert

Use the msdp-tracertcommand to trace the transmission path of SA messages in the network.

Any view

mtu

Use the mtu command to set the size of Maximum Transmission Unit (MTU) of the ATM interface.

Interface view

mtu

Use the mtu command to configure MTU of Kompella MPLS L2VPN.

MPLS L2VPN view

mtu (ATM Interface)

Use the mtu command to set the MTU size of the ATM interface.

Interface view

mtu (Ethernet/GE Interface)

Use the mtu command to set the MTU size of the Ethernet interface.

Ethernet Interface view

mtu label-including

Use the mtu label-includingcommand to configure to include MPLS label length in outgoing interface

MTU calculation.

MPLS view

mtu (POS Interface)

Use the mtu command to set the MTU size of the POS interface.

POS Interface view

mtu (serial interface)

Use the mtu command to set MTU of the serial interface.

AM Interface view

AUX Interface view

Serial Interface view

mtu (Tunnel Interface)

Use the mtu command to set the maximum transmission unit (MTU) for Tunnel interface.

Tunnel Interface view