3Com Router 5000/6000 Family | 105 |
Command Reference |
|
Use the
Voice Dial Program view
Use the
Voice Dial Program view
oam
Use the oam
ATM Class view
PVC view
oam frequency
Use the oam frequency command to enable the transmission of OAM F5 Loopback cell so as to check the PVC status. You can also enable OAM F5 Loopback retransmission check or modify the related parameters of the retransmission check.
ATM Class view
PVC view
oamping interface
Use the oamping interface command to enable the specified ATM interface to send OAM cells on the specified PVC for checking link state. Receiving no response upon expiration of the specified time indicates that the link is disconnected, busy, or prone to packet loss.
ATM Interface view
Use the
OSPF view
open
Use the open command to set up control connection to the remote FTP server.
FTP Client view
Use the
Analog E&M Voice Subscriber Line view
option
Use the option command to configure the
DHCP Address Pool view
organization
Use the organization command to specify the name of the organization to which the entity belongs.
PKI Entity view
Use the
PKI Entity view
Use the
MSDP view
osm connect slot
Use the osm connect slot command to connect the current control terminal to the OSM board to manage the system on the OSM board. If you want to return from the OSM board to the operation interface on the router, click hot key <Ctrl+k>.
User view
osm reboot slot
Use the osm reboot slot command to reset the OSM board.
User view
osm reload slot
Use the osm reload slot command to restart the operation system on OSM board.
User view
osm shutdown slot
Use the osm shutdown slot command to shut down the operation system on OSM board. This operation equals to execute the turn off command on the operation system of OSM board.
