3Com manual 3Com Router 5000/6000 Family 125 Command Reference

3Com Router 5000/6000 Family	125
Command Reference

reset dlsw bridge-entry

Use the reset dlsw bridge-entrycommand to clear the entry cache information in the DLSw bridge group.

User view

reset dlsw circuits

Use the reset dlsw circuits command to clear the DLSw virtual circuit information.

User view

reset dlsw ethernet-backup circuit

Use the reset dlsw ethernet-backup circuit command to clear information about all circuits that the router and its neighbors have established with the remote peers since DLSw Ethernet redundancy is enabled.

User view

reset dlsw ethernet-backup map

Use the reset dlsw ethernet-backup map command to clear the MAC address map of the Ethernet switch support feature.

User view

reset dlsw reachable-cache

Use the reset dlsw reachable-cachecommand to clear information from the reachable-cache of the

DLSw.

User view

reset dlsw tcp

Use the reset dlsw tcp command to reestablish or delete all connection to all the remote peers.

Use the reset dlsw tcp ip-addresscommand to reestablish a TCP connection or delete the connection to the specified remote peer.

User view

reset dns dynamic-host

Use the reset dns dynamic-hostcommand to clear the current contents in the domain name cache of the

DNS client.

User view

reset dvpn all

Use the reset dvpn all command to clear all operating information about a specified DVPN domain and to initiate the DVPN domain.

User view

reset dvpn map

Use the reset dvpn map command to clear a specified map.

User view

reset dvpn session

Use the reset dvpn session command to clear a specified session.

User view

reset dvpn statistics

Use the reset dvpn statistics command to clear all the statistics information of a DVPN module.

User view

reset encrypt-card sa

Use the reset encrypt-card sa command to clear the SAs on the encryption card.

User view

reset encrypt-card statistics

Use the reset encrypt-card statistics command to clear the statistics during processing of the encryption card.

User view

reset encrypt-card syslog

Use the reset encrypt-card syslog command to clear all the logging information on the encryption card.

User view

reset esis statistics

Use the reset esis statistics command to reset statistics information about ES-IS flow.

User view

reset fcm

Use the reset fcm command to clear the dial-up negotiation failure counter and the timeout disconnection counter for each FCM interface.

User view