132 | 3Com Router 5000/6000 Family |
| Command Reference |
route-distinguisher
Use the route-distinguishercommand to configure RD for an MPLS VPN instance. A vpn-instance cannot run until it is configured with an RD.
route-policy
Use the route-policycommand to create a route-policy or a route-policy node and enter the corresponding view.
route-policy
Use the route-policycommand to configure a route-policy node and enter the route-policy view.
route-tag
Use the route-tagcommand to specify a tag value to identify VPN import route.
routed-bridge protocol
Use the routed-bridge protocol command to enable the support of routed bridge encapsulation to a network protocol.
router id
Use the router id command to configure the ID of a router running the OSPF protocol.
routing-table limit
Use the routing-table limit command to limit the route maximum in a vpn-instance, to avoid too many routes in the ingress interface of the PE router.
MBGP VPN-Instance view
rsa local-key-pair create
Use the rsa local-key-pair create command to generate the local RSA host key pair and server key pair.
rsa local-key-pair destroy
Use the rsa local-key-pair destroy command to remove all RSA keys on the server (including the host key pair and the server key pair).
rsa peer-public-key
Use the rsa peer-public-keycommand to enter public key view. After that, you may use the public-key-code begin command and the public-key-code end command to configure the public key of the client.
rsh
Use the rsh command to execute a command on a remote host remotely.
rtpq
Use the rtpq command to configure to apply Realtime Transport Protocol (RTP) Priority Queuing.
rule
Use the rule command to add a rule in current ACL view.
rule
Use the rule command to configure the number-substitute rules.
sa authentication-hex
Use the sa authentication-hexcommand to set the SA authentication key manually for the ipsec policy of manual mode.
sa duration
Use the sa duration command to specify the ISAKMP Sa duration for an IKE proposal.