3Com 5000/6000 manual Isdn number-property

90	3Com Router 5000/6000 Family
	Command Reference

isdn number-property

Use the isdn number-propertycommand to set the type and code scheme of calling or called numbers in incoming or outgoing ISDN calls.

ISDN Interface view

isdn overlap-sending

Use the isdn overlap-sendingcommand to set the system to send the called number information in the overlap mode on the ISDN interface.

ISDN Interface view

isdn q921-permanent

Use the isdn q921-permanentcommand to enable the Q.921 permanent link function.

ISDN Interface View

isdn pri-slipwnd-size

Use the isdn pri-slipwnd-sizecommand to set the slide window size on a PRI interface.

Interface view

isdn protocol-mode

Use the isdn protocol-modecommand to set the ISDN interface to operate on the user side or network side of ISDN protocol.

ISDN Interface view

isdn protocol-type

Use the isdn protocol-typecommand to set the ISDN protocol to be run on an ISDN interface.

ISDN Interface view

isdn send-restart

Use the isdn send-restartcommand to enable PRI interfaces to actively send ISDN RESTART messages to clear calls of the remote end before maintaining B channels.

System view

isdn spid auto_trigger

Use the isdn spid auto_trigger command to enable SPID auto-negotiation once on the BRI interface running the NI protocol.

ISDN BRI Interface view

isdn spid nit

Use the isdn spid nit command to set the SPID processing mode to NIT (Not Initial Terminal) on an

NI-compliant BRI interface.

ISDN BRI Interface view

isdn spid resend

Use the isdn spid resend command to set the number of INFORMATION message retransmission attempts for SPID negotiation or initialization on an NI-compliant BRI interface.

ISDN BRI Interface view

isdn spid service

Use the isdn spid service command to configure the service types that must be supported in SPI negotiation on the BRI interface adopting NI protocol.

ISDN BRI Interface view

isdn spid timer

Use the isdn spid timer command to set the duration of the timer TSPID for an NI-compliant BRI interface to timer_length.

ISDN BRI Interface view

isdn spid1

Use the isdn spid1 command to configure SPID information for the B1 channel on the NI-compliant BRI interface.

ISDN BRI Interface view

isdn spid2

Use the isdn spid2 command to configure SPID information for the B1 channel on an NI-compliant BRI interface.

ISDN BRI Interface view