3Com 5000/6000 manual Interface or Subinterface view, ATM Pvc-Group view

84	3Com Router 5000/6000 Family
	Command Reference

ip address ppp-negotiate

Use the ip address ppp-negotiatecommand to allow IP address be assigned through negotiation at the interface.

Interface view

ip address unnumbered

Use the ip address unnumbered command to enable an interface to borrow the IP address of another interface.

Interface view

ip as-path-acl

Use the ip as-path-aclcommand to configure an AS path regular expression.

System view

ip binding vpn-instance

Use the ip binding vpn-instancecommand to bind an interface or subinterface to a vpn-instance.

Interface (or Subinterface) view

ip community-list

Use the ip community-listcommand to configure a BGP community list.

System view

ip count enable

Use the ip count enable command to enable IP accounting.

System view

ip count exterior threshold

Use the ip count exterior-thresholdcommand to configure maximum number of entries in the exterior hash table, with each entry for an IP packet that does not match any IP accounting rule.

System view

ip count firewall denied

Use the ip count firewall-deniedcommand to configure the IP Accounting to count the IP packets denied by the firewall on the current interface.

Interface view

ip count inbound packets

Use the ip count inbound-packetscommand to configure the IP Accounting to count inbound IP packets on the current interface.

Interface view

ip count interior threshold

Use the ip count interior-thresholdcommand to configure maximum number of entries in the interior hash table, with each entry for an IP packet matching the IP accounting rule.

System view

ip count outbound-packets

Use the ip count outbound-packetscommand to configure the IP Accounting to count outbound IP packets on the current interface.

Interface view

ip count rule

Use the ip count rule command to configure IP accounting rules.

System view

ip count timeout

Use the ip count timeout command to configure the aging time of IP accounting entries.

System view

ip df-check enable

Use the ip df-check enable command to enable don’t fragment bit (DF-bit) check for IP packets.

System view

ip-dscp

Use the ip-dscpcommand to configure the PVC to carry packets of the specified priority levels when the

DSCP identifier in the IP packet is used to identify the priority levels of packets.

ATM Pvc-Group view