
40 | 3Com Router 5000/6000 Family |
| Command Reference |
display dhcp relay statistics
Use the display dhcp relay statistics command to view the statistics of DHCP relay in packet errors, DHCP packets received from clients, DHCP packets received from and sent to servers, and DHCP packets sent to clients (including unicast and broadcast packets).
Any view
display dhcp server conflict
Use the display dhcp server conflict command to view the DHCP address conflict statistics, including the information in conflicted IP address, conflict detection type, and conflict time.
Any view
display dhcp server expired
Use the display dhcp server expired command to view the expired address leases in a DHCP address pool. In certain conditions, the addresses of the expired leases will be allocated to other DHCP clients.
Any view
display dhcp server
Use the display dhcp server
Any view
display dhcp server
Use the display dhcp server
Any view
display dhcp server statistics
Use the display dhcp server statistics command to view the statistics on the DHCP server, including such information as number of DHCP address pools, automatically or manually bound address and expired addresses, number of unknown packets, number of DHCP request packets, and number of response packets.
Any view
display dhcp server tree
Use the display dhcp server tree command to view the
Any view
display
Use the display
Any view
display dialer
Use the display dialer command to view information on DCC interfaces.
Any view
display dlsw
Use the display dlsw
Any view
display dlsw circuits
Use the display dlsw circuits command to view the DLSw virtual circuits.
Any view
display dlsw
Use the display dlsw
Any view
display dlsw
Use the display dlsw
Any view
display dlsw information
Use the display dlsw information command to view the DLSw exchange capability information. The output information of the command facilitates the user to understand the status of the DLSw virtual circuit and perform fault diagnosis.
Any view
display dlsw information
Use the display dlsw information command to display DLSw capability exchange information. The output of this command can help you understand the status of DLSw virtual circuits.