3Com Router 5000/6000 Family

5

Command Reference

 

ani-offset

Use the ani-offsetcommand to configure the number of digits of the called number to be collected prior to requesting the calling party information.

R2 CAS view

answer

Use the answer command to configure whether the terminating point is required to send answer signal.

R2 CAS view

apply access-vpnvpn-instance

Use the apply access-vpnvpn-instancecommand to specify to search private network forwarding routes

in vpn-name1,vpn-name2,vpn-name3,vpn-name4,vpn-name5,vpn-name6 (if they all exist) and forward packets after policy routing is enabled to satisfy route-policy.

Route-Policy view

apply as-path

Use the apply as-pathcommand to specify the AS numbers to be added in front of the original AS path in route-policy.

Routing Policy view

apply community

Use the apply community command to set BGP community attributes in route-policy.

Routing Policy view

apply cost

Use the apply cost command to set the route cost value of route information.

Routing Policy view

apply cost-type

Use the apply cost-typecommand to set the route cost type of route information.

Routing Policy view

apply default output-interface

Use the apply default output-interfacecommand to set default forwarding interface for packets.

Route-Policy view

apply ip-address

Use the apply ip-addresscommand to set the next hop address of route information.

Routing Policy view

apply ip-address default next-hop

Use the apply ip-address default next-hopcommand to set the default next hop of a packet.

Route-Policy view

apply ip-addressnext-hop (for Multicast Policy Routing)

Use the apply ip-addresscommand to configure the next hop IP address list in a route-node.

Route-Policy view

apply ip-addressnext-hop (for Unicast Policy Routing)

Use the apply ip-addressnext-hopcommand to set the packet next hop.

Route-Policy view

apply ip-dscp

Use the apply ip-dscpcommand to configure to modify the packet DSCP value matching the policy.

Route-Policy view

apply ip-precedence

Use the apply ip-precedencecommand to set precedence of IP packets.

Route-Policy view

apply isis

Use the apply isis command to apply the level of a matched route to be redistributed to Level-1, Level-2 or Level-1-2.

Routing Policy view

apply local-preference

Use the apply local-preferencecommand to apply the local preference of route information.

Routing Policy view

apply mpls-label

Use the apply mpls-labelcommand to assign MPLS labels for public network routes that match route-policy filter conditions.

Route-Policy view

Page 5
Image 5
3Com 5000/6000 manual Route-Policy view, Routing Policy view