72 | 3Com Router 5000/6000 Family |
| Command Reference |
fr lmi t392dce
Use the fr lmi t392dce command to set T392 parameter at the DCE side.
Interface view
fr lmi type
Use the fr lmi type command to configure the Frame Relay LMI protocol type.
Interface view
fr map bridge
Use the fr map bridge command to add a
Interface view
fr map clns
Use the fr map clns command to add an FR mapping for OSI packets.
Interface view
fr map ip
Use the fr map ip command to add an IP address map entry for FR.
Interface view
fr map ipx
Use the fr map ipx command to add an IPX address map entry.
Interface view
fr map ppp interface
Use the fr map ppp interface
PVC) to a PPP link, so the PPPoFR link is established, and thus PPP packets can be sent/received on FR
PVC.
Interface view
fr match
Use the fr match command to configure a PVC group to differentiate traffic by the Precedence or DSCP identifier in the TOS field of the IP header.
FR Pvc-Group view
fr
Use the fr
FR Pvc-Group view
fr
Use the fr
Interface view
fr
Use the fr
Frame Relay Interface view
MFR Interface view
fr
Use the fr
FR Pvc-Group view
fr switch
Use the fr switch command to create a PVC used for frame relay switching and enter frame relay switching view.
System view
fr switching
Use the fr switching command to enable frame relay PVC switching.
System view
fr
Use the fr
Frame Relay Interface view
MFR Interface view
fr
Use the fr
Frame Relay Interface view
MFR Interface view
