Yamaha RX-V557 Enjoying 2-channelsoftware in surround, When you select the SUR. STANDARD program

Notes

•Some 6.1-channel compatible discs do not have a signal (flag) which this unit can automatically detect. When playing these kinds of discs with 6.1-channel, select a decoder manually (PLIIx Music, EX/ES or EX).

•6.1-channel playback is not possible even if EXTD SUR. is pressed in the following cases:

– When “SUR. LR” (see page 50) or “SUR. B” (see page 50) is set to NONE.

– When the source connected to the MULTI CH INPUT jack is being played.

– When the source being played does not contain surround left and right channel signals.

– When a Dolby Digital KARAOKE source is being played.

– When “2ch Stereo” or “Direct Stereo” is selected.

•When the power of this unit is turned off, this setting will be reset to AUTO.

•The Pro Logic IIx decoder is not available when “SUR. B” is set to NONE (see page 50).

■Enjoying 2-channel software in surround

Signals input from 2-channel sources can also be played back on multiple channels.

Press AMP to select the AMP mode, then press STANDARD on the remote control to switch between the SUR. STANDARD and SUR. ENHANCED programs.

AMP STANDARD

5

Or press MOVIE to select the MOVIE THEATER program.

MOVIE

4

Press SELECT on the remote control to select the decoder.

SELECT

6

You can select from the following modes depending on the type of software you are playing and your personal preference.

PLAYBACK

When you select the SUR. STANDARD program:

PRO LOGIC

Dolby Pro Logic processing for any sources.

PLII Movie

Dolby Pro Logic II processing for movie software.

PLII Music

Dolby Pro Logic II processing for music software.

PLII Game

Dolby Pro Logic II processing for game software.

PLIIx Movie

Dolby Pro Logic IIx processing for movie software.

PLIIx Music

Dolby Pro Logic IIx processing for music software.

PLIIx Game

Dolby Pro Logic IIx processing for game software.

Neo:6 Cinema

DTS processing for movie software.

Neo:6 Music

DTS processing for music software.

When you select the SUR. ENHANCED or MOVIE THEATER program:

PRO LOGIC

Dolby Pro Logic processing for any sources.

PLII Movie

Dolby Pro Logic II processing for movie software.

PLIIx Movie

Dolby Pro Logic IIx processing for movie software.

Neo:6 Cinema

DTS processing for movie software.

y

You can also select a decoder by pressing j / i on the remote control when the decoder type is displayed in the front panel display.

Note

The Pro Logic IIx decoder is not available when “SUR. B” is set to NONE (see page 50).

OPERATION BASIC

English

29