GETTING STARTED
Supplied accessories
Please check that you received all of the following parts.
Remote control
Batteries (4) | AM loop antenna | |
(AAA, R03, |
| adapter (U.K. model only) |
Indoor FM antenna |
|
|
INTRODUCTION
Installing batteries in the remote control
2 1
3
1Press the 
part and slide the battery compartment cover off.
2Insert four supplied batteries (AAA, R03,
3Slide the cover back until it snaps into place.
Notes on batteries
•Change all of the batteries if you notice the following conditions; the operation range of the remote control decreases, the indicator does not flash or its light becomes dim.
•Do not use old batteries together with new ones.
•Do not use different types of batteries (such as alkaline and manganese batteries) together. Read the packaging carefully as these different types of batteries may have the same shape and color.
•If the batteries have leaked, dispose of them immediately. Avoid touching the leaked material or letting it come into contact with clothing, etc. Clean the battery compartment thoroughly before installing new batteries.
•Do not throw away batteries with general house waste; dispose of them correctly in accordance with your local regulations.
If the remote control is without batteries for more than 2 minutes, or if exhausted batteries remain in the remote control, the contents of the memory may be cleared. When the memory is cleared, insert new batteries, set up the remote control code and program any acquired functions that may have been cleared.
English
3
