SPEAKER SETUP
Speaker placement
The speaker layout below shows the standard
*
FLCFR
| 30˚ |
SL | SR |
| 60˚ |
SL | 80˚ | SR |
|
| SB |
Surround speakers (SR and SL)
The surround speakers are used for effect and surround sounds. Place these speakers behind your listening position, facing slightly inwards, about 1.8 m above the floor.
Surround back speaker (SB)
The surround back speaker supplements the surround speakers and provides for more realistic
Subwoofer
The use of a subwoofer, such as the YAMAHA Active Servo Processing Subwoofer System, is effective not only for reinforcing bass frequencies from any or all channels, but also for high fidelity reproduction of the LFE (low- frequency effect) channel included in Dolby Digital and DTS software. The position of the subwoofer is not so critical, because low bass sounds are not highly directional. But it is better to place the subwoofer near the front speakers. Turn it slightly toward the center of the room to reduce wall reflections.
PREPARATION
1.8 m
Front speakers (FR and FL)
The front speakers are used for the main source sound plus effect sounds. Place these speakers an equal distance from the ideal listening position. The distance of each speaker from each side of the video monitor should be the same.
Center speaker (C)
The center speaker is for the center channel sounds |
|
(dialog, vocals, etc.). If for some reason it is not practical |
|
to use a center speaker, you can do without it. Best results, |
|
however, are obtained with the full system. Align the front |
|
face of the center speaker with the front face of your video |
|
monitor. Place the speaker centrally between the front |
|
speakers and as close to the monitor as possible, such as |
|
directly over or under it. | English |
|
11
