Yamaha RX-V557 owner manual Remote controlling Zone, Standby

ZONE 2

Remote controlling Zone 2

The supplied remote control can be used to control Zone

2.You can even select the input source and control components located in the main room directly from the second room regardless of the listening condition in the main room.

y

You can also turn on/off the main or Zone 2 mode by pressing MAIN or ZONE 2 on the front panel.

■To enable Zone 2 mode on the remote control

1Press .

■To control Zone 2

1Press to set the remote control to Zone 2.

The TRANSMIT indicator on the remote control lights up while the remote control is in Zone 2 mode.

2Press SYSTEM POWER to turn Zone 2 power on.

3Press an input selector button to select the input source you want to listen to in the second room.

CD	MD/CD-R	TUNER	SLEEP
DVD	DTV/CBL	V-AUX	MULTI CH IN
VCR			AMP

2Press CODE SET using a ballpoint pen or similar object.

The TRANSMIT indicator on the remote control flashes twice.

TRANSMIT

CODE SET

3Enter the code number “2999”.

Immediately after you have configured the remote control for Zone 2, the remote will enter main mode. When the remote is in main mode, you can turn the main unit on, or set it in standby mode independently of Zone 2 by pressing SYSTEM POWER or

STANDBY.

Notes

•If you enable Zone 2, the Zone function is applied to the current remote control ID (ID1: default code, ID2: alternative code). However, because the remote control codes for Zone 2 are common to ID1 and ID2, the remote control ID does not change even if it is switched.

•To release ZONE 2, clear the remote control code set for ,

or set a remote control code other than a TV code for .

4You can control Zone 2 using the input selector buttons, STANDBY, SYSTEM POWER and MUTE.

TV AV

y

Zone 2 volume cannot be adjusted with the remote control. Use the control on the amplifier in the second room.

Note

The remote control returns to the main mode 10 seconds after you

press , or if you press any button other than SYSTEM POWER, STANDBY, MUTE or the input selector buttons. If the

TRANSMIT indicator is turned off, press to set the remote control to Zone 2 mode before turning Zone 2 power on or off, changing the input source, or muting the sound.

62