Connecting to the Multi CH Input jacks | Yamaha RX-V557 specs

CONNECTIONS

■Connecting to the MULTI CH INPUT jacks

This unit is equipped with 6 additional input jacks (left and right FRONT, CENTER, left and right SURROUND and SUBWOOFER) for discrete multi-channel input from a multi-format player, external decoder, sound processor or pre- amplifier.

Connect the output jacks on your multi-format player or external decoder to the MULTI CH INPUT jacks. Be sure to match the left and right outputs to the left and right input jacks for the front and surround channels.

MULTI CH INPUT

R	L
FRONT
SURROUND
SUB	CENTER
WOOFER

R L	Subwoofer
	out
	Center
	out
	Multi-format player/
Front	External decoder
out

R L

Surround out

Notes

•When you select MULTI CH INPUT as the input source, this unit automatically turns off the digital sound field processor, and you cannot select sound field programs.

•This unit does not redirect signals input to the MULTI CH INPUT jacks to accommodate for missing speakers. We recommend that you connect at least a 5.1-channel speaker system before using this feature.

•When headphones are used, only front left and right channels are output.

16

Image 18

Yamaha RX-V557 owner manual Connecting to the Multi CH Input jacks

Contents

RX-V557 For U.K. customers Special Instructions for U.K. Model Contents Sound field features FeaturesBuilt-in 6-channel power amplifier Other features Getting Started Supplied accessoriesInstalling batteries in the remote control Please check that you received all of the following parts Controls and Functions Front panel Input Mode VolumePRESET/TUNING Edit Speakers A/B Remote control Using the remote control Front panel display Input channel indicators/speaker indicators 96/24 indicatorLFE indicator Zone 2 indicator Rear panel AC Outlets Speaker Setup Speaker placement Tighten the knob to secure the wire Ohms before using seeSpeaker connections Subwoofer jack Front terminalsConnect surround speakers 6, 7 to these terminals Surround Back terminals Before connecting components Connections Connecting video components Connections for DVD playback Connecting to the Multi CH Input jacks Connections for other video components Video AUX jacks on the front panel Connecting audio components Connections for audio components Clamp it with Pliers Connecting the FM and AM antennasInsert the cable Wire into the slot Snap the cover into place AC Outlets Switched Connecting the power supply cordConnecting the AC power cord Memory back-up Press STANDBY/ON to turn off the power Speaker impedance settingTurning on the power Rotate Program to move through the menu and select SP IMP Basic Setup Using the Basic Setup menu Press j / i to select the number of speakers you connected Press d to display SET/CANCELPress d to display the Speakers parameter Press Enter to confirm your selection To balance the speaker levels Perform the following steps after see Basic operations Adjust the volume to the desired output levelPlayback Select the input source Select a sound field program if desired To listen with headphonesTo adjust the tone Silent Cinema Playing video sources Background Selecting sound field programsSelecting Multi CH Input Front panel operation Auto Auto Remote control operationEnjoying multi-channel software Decoders select with j When you select the SUR. Enhanced or Movie Theater program Press Select on the remote control to select the decoderWhen you select the SUR. Standard program Enjoying 2-channel software in surround This adjusts the level of compression Listening to high fidelity stereo sound Direct StereoNight listening modes Listening to unprocessed input signals Downmixing to 2 channelsVirtual Cinema DSP Selecting input modes Rotate Input to select the input sourceDisplaying information about the input Source FM/AM Tuning Automatic and manual tuning Automatically presetting FM stations Presetting stationsManual tuning Hold down the button to continue searching Press and hold Memory MAN’L/AUTO FM for more than 3 seconds Manually presetting stationsAutomatic preset tuning options Tune into a station Selecting preset stations Shows the displayed station has been stored as C3Repeat steps 1 to 5 to store other stations See Selecting preset stations Exchanging preset stationsSelect preset station E1 Press and hold PRESET/TUNING Edit for more than 3 seconds Receiving Radio Data System stations Changing the Radio Data System mode Do not press FREQ/TEXT until a Radio Data System indicator PTY Seek function Selected program type appears in the front panel display To cancel this function EON function Special considerations when recording DTS software Recording Sound Field Program Descriptions For movie/video sources SUR. Standard For music sources Hall in Vienna Advanced Operations Using the sleep timerSetting the sleep timer Canceling the sleep timer Amount of time Press Enter when you have completed your adjustment Manually adjusting speaker levelsPress j / i to adjust the speaker output level Control range is from +10 dB to -10 dB SET Menu Using SET Menu Front speakers Front Speaker settings Aspeaker SETSubwoofer phase Swfr Phase Center speaker Center Unit Unit Speaker level BSP LevelSpeaker distance CSP Distance Speaker distances Muting type Mute TYP Audio settings Gaudio SETAudio delay A. Delay Tone bypass TC.BYPASS Display settings Adisplay SET Dimmer Dimmer Video conversion V. Conv Speaker B setting SP B Parameter initialization CPARAM. INI Advanced Setup Menu Advanced Setup menu is displayed in the front panel displayPress STANDBY/ON to confirm your selection Speaker impedance SP IMP Advanced Setup menu itemsFactory presets Preset Remote Remote Controlling this unit Remote Control FeaturesControl area Controlling other components Press Code SET using a ballpoint pen or similar object Setting remote control codesRemote Control Code Default Settings Transmit indicator on the remote control flashes twice Controlling other components VCR Enter the code number 9991 or 9992 see the table below Switching library codesClearing set up remote control codes Enter the code number System configuration and connections example ZoneZone 2 connections Remote controlling Zone Standby For DVDs encoded in DTS To turn on all units the main unit and Zone 2 unitSpecial considerations for DTS software For CDs encoded in DTS What is a sound field Changing parameter settings Editing Sound Field Parameters Resetting parameters to the factory Presets Use PARAM. INI see DSP Level DSP level INIT.DLY Initial delaySound Field Parameter Descriptions For 2ch Stereo Direct Direct CT Width Center width Dimension DimensionFor 6ch Stereo For DTS Neo6 Music Image Center image Troubleshooting General Troubleshooting Digital Output Remote control Tuner Rotate Program to move through the menu and select Preset Resetting the Factory PresetsAdvanced Setup menu appears in the front panel display Press Straight Effect to select the desired setting Glossary Audio formats Cinema DSP Sound field programsAudio information ITU-R Composite video signal Video signal informationComponent video signal Video signal Specifications APPENDIX-i APPENDIX-ii APPENDIX-iii APPENDIX-iv APPENDIX-v All rights reserved