Yamaha RX-V557 Option Menu, 2Press AMP, 5Repeat steps 1 through 4 to rename each input

■Input rename C)INPUT RENAME

Use this feature to change the name of the inputs in the front panel display.

1Press an input selector button to select the input you want to change the name of.

2Press AMP.

3Press j / i to place the _ (under-bar) under the space or the character you want to edit.

4Press u/ dto select the character you want, then use j / i to move to the next space.

•You can use up to 8 characters for each input.

•Press dto change the character in the following order, or press uto go in the reverse order:

A to Z, a space, 0 to 9, a space, a to z, a space, symbols (#, *, –, +, etc.).

5Repeat steps 1 through 4 to rename each input.

6To exit, press SET MENU when finished.

SET MENU

3 OPTION MENU

Use to adjust the optional system parameters.

■Display settings A)DISPLAY SET

Dimmer DIMMER

Use to adjust the brightness of the front panel display. Choices: –4 to 0

Video conversion V. CONV.

Use this feature to turn on/off conversion of composite (VIDEO) signals to S-video signals. This allows you to output converted video signals from the S VIDEO jacks when no S-video or component signals are input. This feature also converts S-video signals to component signals when no component signals are input.

Choices: ON, OFF

•Select OFF not to convert any signals (except S-video signals to composite signals).

•Select ON to convert composite signals to S-video and component signals, and to convert S-video signals to component signals.

•Regardless of the setting, S-video signals are always converted to composite signals.

Notes

•Converted video signals are only output to the MONITOR OUT jacks. When recording you must make the same type of video connections (i.e., S-video) between each component.

•When converting composite video or S-video signals from a VCR to component signals, the picture quality may suffer depending on your VCR.

■Memory guard B)MEMORY GUARD

Use this feature to prevent accidental changes to DSP program parameter values and other system settings. Choices: ON, OFF

Select ON to protect:

•DSP program parameters

•All SET MENU items

•All speaker levels

When “MEMORY GUARD” is set to ON, you cannot use the test tone or select any other SET MENU items.

OPERATION ADVANCED

English

53