![](/images/new-backgrounds/1049382/4938281x1.webp)
Changing the Radio Data System mode
Four modes are available for displaying Radio Data System data. The PS, PTY, RT and/or CT indicators that correspond to the Radio Data System data services offered by the station light up in the front panel display.
1Press TUNER on the remote control to set this unit to tuner mode.
TUNER
2Press FREQ/TEXT repeatedly on the remote control to display the various Radio Data System data offered by the transmitting station.
FM/AM TUNING
Notes
• Do not press FREQ/TEXT until a Radio Data System indicator |
lights up in the front panel display. You cannot change the mode |
if you press the button prior to this. This is because this unit has |
not finished receiving all of the Radio Data System data from |
the station. |
• Radio Data System data not offered by the station cannot be |
selected. |
• This unit cannot utilize the Radio Data System data source if |
the signal received is not strong enough. In particular, the RT |
mode requires a large amount of data, so it is possible that the |
RT mode may not be displayed even if other Radio Data System |
modes (PS, PTY, etc.) are displayed. |
• Radio Data System data may not be received under poor |
reception conditions. In such cases, press TUNING MODE |
(AUTO/MAN’L MONO) so that the AUTO indicator |
disappears from the front panel display. Although this will |
change the reception mode to manual, Radio Data System data |
may be displayed when you change the display to Radio Data |
System mode. |
• If the signal strength is weakened by external interference |
FREQ/TEXT
PS
during the reception of a Radio Data System station, the Radio |
Data System data service may be cut off suddenly and |
“...WAIT” will appear in the front panel display. |
Remote control
PTY
RT
CT
Frequency display
English
39