PIONEERPOS G24-LC manual UI User Interface, +CRSM, Restricted SIM Access, At+Crsm=?

UI (User Interface)

UI (User Interface)

+CRSM, Restricted SIM Access

This command provides limited access to the Elementary Files on the SIM. Access to the SIM database is restricted to the commands which are listed at <command>. All parameters of AT+CRSM are used as specified by GSM 11.11 version 8.7.0. As response to the command, the G24-L sends the actual SIM information parameters and response data. Error result code "+CME ERROR" may be returned if the command cannot be transferred to the SIM, e.g. if the SIM is not inserted, or defected, or PIN1/PUK authentication required, or required input parameters not present. However, failure in the execution of the command in the SIM is reported in <sw1> and <sw2> parameters.

Some of the AT+CRSM commands require PIN/PIN2 authentication.

Command
Type	Syntax	Response/Action	Remarks
Set	AT+CRSM=<command>	+CRSM:	Set command transmits the
	,[<file_id>[,<P1>,<P2>,<	<sw1>,<sw2>[,<response>]	SIM <command> and its
	P3>[,<data>]]]	OK	required parameters to the ME.
			ME sends the actual SIM infor-
		or:
			mation parameters and
		+CME ERROR: <err>	response data.
Test	AT+CRSM=?	+CRSM:	The test command returns the
		(list of supported	possible ranges of CRSM
		<command>s),	parameters.
		(possible <file_id>s range
		value),
		(possible <P1> range
		value),
		(possible <P2> range
		value),
		(possible <P3>range value),
		OK
		or:
		+CME ERROR: <err>

3-216 G24-L AT Commands Reference Manual April 15, 2008