PIONEERPOS G24-LC manual 99 +MPCMC Parameters, Parameter Description Flag, +Mpcmc?, +Mpcmc=?

Hardware Information

Command
Type	Syntax	Response/Action	Remarks
Set	+MPCMC=<flag>	OK	The Set command is used for setting
		or:	the PCM clock configuration.
		+CME ERROR: <err>
Read	+MPCMC?	+MPCMC: <flag>	The Read command returns the current
		OK	PCM clock <flag> value.
		or:
		+CME ERROR: <err>
Test	+MPCMC=?	+MPCMC: (list of	The Test command returns the possible
		supported <flag>s)	<flag> values.
		OK

The following table shows the +MPCMC parameters.

		Table 3-99: +MPCMC Parameters
<Parameter>		Description
<flag>	0	Non-continuous PCM clock.
	1	Continuous PCM clock.
	Before the AT+MPCMC command is set for the first time,
	this value is 0.
	Power-up is according to the flex.

Example

AT+MPCMC=? +MPCMC:(0-1)

OK AT+MPCMC=1

OK AT+MPCMC? +MPCMC: 1

OK AT+MPCMC=0

OK AT+MPCMC? +MPCMC: 0

OK

3-154 G24-L AT Commands Reference Manual April 15, 2008