PIONEERPOS G24-LC At&C, At&D, At&K, At&Y, April 15 G24-L AT Commands Reference Manual 223

Chapter 3: AT Commands Reference

Table 3-146: Profile Parameters (Cont.)

Profile	Description	Parameter	Default	Length in
Parameter		Range	Value	Bits
AT&C	Set circuit 109 (DCD) behavior	0-2	1	2
AT&D	Set circuit 109 (DTR) behavior	0-4	2	3
AT&K	Flow control	0, 3-6	3	3
AT&Y	Power-up profile	0-1	0	1
S0	Auto-answer	0-255	0	8
S2	Escape code character	0-255	43	8
S3	Carriage return character	0-127	13	7
S4	Line feed character	0-127	10	7
S5	Backspace character	0-32	8	6
S7	Wait time for carrier. Register S7 tells the data	1-255	30	8
	adaptor how many seconds to wait for a
	remote data adaptor's carrier signal before
	hanging up. The register value can be
	increased if the data adaptor does not detect a
	carrier within the specified time. If the data
	adaptor detects a remote carrier signal within
	the specified time, it sends a CONNECT
	response and enters Data mode. If it does not
	detect a remote carrier signal within the speci-
	fied time, it sends the NO ANSWER (or 8)
	response, hangs up, and returns to the Com-
	mand Mode.
S 12	Time, in 50ths of a second, until OK is dis-	0-255	20	8
	played after entering command mode by an
	escape sequence.

Example

AT&W0

OK

AT&W1

OK

April 15, 2008 G24-L AT Commands Reference Manual 3-223