PIONEERPOS G24-L +CSMP, Set Text Mode Parameters, 45 +CSCA Parameters, Parameter Description Sca

Chapter 3: AT Commands Reference

Command	Syntax	Response/Action	Remarks
Type
Set	+CSCA=<sca>[,<tosca>]	OK	The Set command sets the service
		or:	center address.
		+CMS ERROR: <err>
Read	+CSCA?	+CSCA: <sca>,<tosca>
Test			The Test command for +CSCA is not
			defined by ETSI, and therefore is not
			supported by the G24-L. The G24-L
			returns an error.

The following table shows the +CSCA parameters.

	Table 3-45: +CSCA Parameters
<Parameter>	Description
<sca>	Service Center Address
<tosca>	Type of Service Center Address is the current address format setting

Example

AT+CSCA="4252833433"

OK AT+CSCA?

+CSCA: "4252833433",129

OK

+CSMP, Set Text Mode Parameters

This command is a basic command and is used to select values for additional parameters needed when SM is sent to the network or placed in storage when TEXT mode is selected.

Command	Syntax	Response/Action	Remarks
Type
Set	+CSMP=[<fo>[,<vp>	OK	The set command selects values for
	[,<pid>[,<dcs>]]]]	or:	additional parameters needed when SM is
		+CMS ERROR: <err>	sent to the network or placed in storage
			when text format message mode is
			selected.

April 15, 2008 G24-L AT Commands Reference Manual 3-79