
J640/J641 Quick Reference
Loading Ribbon
1.Open the printer.
2.Remove the old ribbon cassette.
3.Slide a new ribbon cassette onto the printhead assembly.
Loading Labels
1.Open the printer.
2.Grasp the handles to pull the supply holders apart and insert the roll of labels into place between the supply holders. The label roll should unwind as shown.
Make sure the labels are free to unwind.
3.Load labels in peel or
Loading for peel mode
Feed the labels over the peel bar and through the lower opening in the label guide.
Loading for non-peel mode
Feed the labels through the upper opening in the label guide.
Ribbon Cassette
Lower Opening
Printhead
Assembly
Supply
Holder
Label
Guide
Upper
Opening
SV60254 Rev. A 3/95 | ©1995 Pitney Bowes, Inc. All rights reserved. |