PIONEERPOS G24-LC manual +MFS, Motorola Frequency of Search, 79 +CPOL Parameters

Network

The following table shows the +CPOL parameters.

		Table 3-79: +CPOL Parameters
<Parameter>		Description
<indexn>	Order number of network operator in the SIM preferred operator list
<format>	Defines the <oper> format:
	0	Long alphanumeric format (up to 16 characters)
	1	Short alphanumeric format (up to 8 characters)
	2	Numeric (default)
<oper>	Name of the network operator

Note: To delete an entry from the list, enter an <index> without an <oper>.

If an <oper> is entered without an <index>, the <oper> is placed in the next free location in the list.

To change the format of <oper> displayed with the Read command, enter a <format>.

User is prevented to edit index No. 0. This is the HOME PLMN and is not stored in the SIM preferred list element file.

When entering a new item with an <index> to a full list, the G24-L deletes the last item, stores the new item in the requested entry, and shifts the rest of the list down.

When entering a new item without an <index> to a full list, the G24-L replaces the last entry with the new item.

+MFS, Motorola Frequency of Search

This command is used to determine how long the G24-L waits before attempting to reregister after a registration attempt has failed and the G24-L is not registered. The available settings are Slow Search, Medium Search, Fast Search or Continuous Search.

See Table 3-80, “+MFS Parameters”, for the minimum interval lengths for every frequency of search. The interval between attempts can vary, depending on the number of operators displayed in the preferred operator list.

This command sets or reads Frequency of Search and Search mode settings. After a Set command has been executed, new Frequency of Search and Search mode values are active.

3-126 G24-L AT Commands Reference Manual April 15, 2008