PIONEERPOS G24-L Parameter Description Sw1 sw2, Sw1 Sw2 Description, Sw1 Sw2 Error Description

					Chapter 3: AT Commands Reference
		Table 3-144: +CRSM Parameters (Cont.)
<Parameter>					Description
<sw1> <sw2>	Integer character format. Information, from the SIM, about the execution of the actual
	command. These parameters are delivered to the TE in both cases, on successful or
	failed execution of the command.
	Responses to commands which are correctly executed:
		<sw1>	<sw2>	Description
		144	0		Normal ending of the command
		145	XX		Normal ending of the command, with extra information
					from the proactive SIM, containing a command for the ME.
					Length 'XX' of the response data.
		158	XX		Length 'XX' of the response data given in case of a SIM data
					download error.
		159	XX		Length 'XX' of the response data.
	Responses to commands which are postponed:
		<sw1>	<sw2>	Error Description
		147	0		SIM Application Toolkit is busy. Command cannot be
					executed at present, further normal commands are allowed.
		146	0X		Command successful but after using an internal update retry
					routine 'X' times.
		146	64		Memory problem.
		148	0		No EF selected.
		148	2		Out of range (invalid address).
		148	4	•	File ID not found.
				•	Pattern not found.
		148	8		File is inconsistent with the command
		152	2		No CHV initialized
		152	4	•	Access condition not fulfilled.
				•	Unsuccessful CHV verification, at least one attempt left.
				•	Unsuccessful UNBLOCK CHV verification, at least one
				•	attempt left.
					Authentication failed.
		152	8		In contradiction with CHV status.
		152	16		In contradiction with invalidation status.
		152	64	•	Unsuccessful CHV verification, no attempt left.
				•	Unsuccessful UNBLOCK CHV verification, no attempt
				•	left.
					CHV blocked.
				• UNBLOCK CHV blocked.

April 15, 2008 G24-L AT Commands Reference Manual 3-219