PIONEERPOS G24-LC manual 124 +CLCK Parameters, April 15 G24-L AT Commands Reference Manual 185

Chapter 3: AT Commands Reference

Command
Type	Syntax	Response/Action	Remarks
Set	+CLCK=<fac>,<mode>	For <fac> where	The Set command performs the
	[,<passwd>	<class> is irrelevant	specified <mode> action on the
	[,<classx>]]	(SC, FD):	specified <fac>.
		+CLCK=<fac>,2
		+CLCK: <status>
		For <fac> with several
		supported <class>es:
		+CLCK=<fac>,2
		+CLCK:
		<status>,<class1>
		[<CR><LF>+CLCK:
		<status>,<class2>
		[…]]
		OK
Read	+CLCK?	+CLCK: ERROR
Test	+CLCK=?	+CLCK: (list of	The Test command returns the list of
		supported <fac>s)	supported facilities.

The following table shows the +CLCK parameters.

		Table 3-124: +CLCK Parameters
<Parameter>			Description
<fac>	SC	SIM Card PIN setting
		<mode>0 Disable PIN
		1 Enable PIN)
	FD	SIM Fixed Dialing memory setting
		<mode>0	Disable fixed dialing feature
		1	Enable fixed dialing feature)
	AO	BAOC (Bar All Outgoing Calls)
	OI	BOIC (Bar Outgoing International Calls)
	OX	BOIC-exHC (Bar Outgoing International Calls except to Home Country)
	AI	BAIC (Bar All Incoming Calls)
	IR	BIC-Roam (Bar Incoming Calls when Roaming outside the home country)
	AB	All Barring services (applicable only for <mode>=0)
	AG	All outgoing barring services (applicable only for <mode>=0)
	AC	All incoming barring services (applicable only for <mode>=0)
<passwd>	String type, 4-8 character password
<mode>	0	Unlock
	1	Lock
	2	Query status (<passwd> does not apply)

April 15, 2008 G24-L AT Commands Reference Manual 3-185