PIONEERPOS G24-LC Setting Up the G24-L Power On and Initial Actions, Phone State Transactions

Chapter 4: Using the Commands

Setting Up the G24-L (Power On and Initial Actions)

There are three phases of connectivity for the G24-L:

•Init General.

In this phase, the G24-L is asked to provide basic information which ensures that the phone is functioning properly.

•Enabling the SIM.

•Registering the SIM on a network in order to see that wireless access is functioning properly.

After these three phases are completed, G24-L is ready for action and you can send/receive voice calls, circuit switched data and GPRS.

The following figures show the phone state transactions:

Init-General

Communication=OK, ID is known

Init Phone

Sim card=OK, Registered to network

No Coverage Coverage Indication Ready

Remote/Local

Remote/Local Connected/Disconnected

Connected/Disconnected

GPRS CSD Data Voice

Figure 4-1: Phone State Transactions

April 15, 2008 G24-L AT Commands Reference Manual 4-1