PIONEERPOS G24-LC +CSCA, Service Center Address, 44 +CSCA Input Characters and Hexadecimal Values

SMS

Example

AT+CMGF=1

OK AT+CMGF? +CMGF: 1

OK AT+CMGF=? +CMGF: (0,1)

OK

+CSCA, Service Center Address

This command handles the selection of the SCA and the TOSCA. The SCA is the phone number of the SC (Service Center). The TOSCA can be 129 (local) or 145 (international), where 129 is the default value. The TOSCA parameter of the Set command is optional, and can be omitted. If the SCA parameter of the Set command is prefixed by the "+" character, it indicates that TOSCA is 145.

The following table shows the +CSCA input characters and their hexadecimal values.

Table 3-44: +CSCA Input Characters and Hexadecimal Values

Character	Description	Hexadecimal
+	International, allowed at	0x2B
	start only
0-9	Digits	0x30
		0x31
		0x32
		0x33
		0x34
		0x35
		0x36
		0x37
		0x38
		0x39
*	Instructions	0x2A
#		0x23
/	Other characters, allowed	0x2F
-	and ignored, not saved	0x2D
(		0x28
)		0x29
blank		0x20
A		0x41
B		0x42
C		0x43
D		0x44
,	Pause control, ignored, not	0x2C
	saved
;	Allowed at end of number,	0x3B
	ignored, not saved

3-78 G24-L AT Commands Reference Manual April 15, 2008