PIONEERPOS G24-LC manual S96, Echo Canceling, 105 S94 Parameters, 106 ATS96 and ATS94 Behavior

Audio

The following table shows the S94 parameters.

Table 3-105: S94 Parameters

<Parameter>		Description
<n>	0	Disable sidetone
	1	Enable sidetone
	On power up the sidetone is enabled.

Example

ATS94=0	//Disable sidetone
OK
ATS94=2
+CME ERROR: <err>
ATS94?
000	//Sidetone disabled
OK

S96, Echo Canceling

This command suppresses a large amount of the output sound picked up by the input device (cancels all echo). S96 value is saved in the Flex.

The following table explains the use of the ATS96 set.

Table 3-106: ATS96 and ATS94 Behavior

ATS96	ATS94	Echo Cancel	Noise Suppress		ST
0	0	Disabled	Disabled		Disabled
0	1	Disabled	Disabled		Enabled
1	0	Enabled	Enabled		Disabled
1	1	Enabled	Enabled		Disabled
Command Type	Syntax	Response/Action		Remarks
Set	ATS96=<n>	OK		The Set command sets the echo
		or:		canceling and noise suppression status.
		+CME ERROR: <err>
Read	ATS96?	<000-disabled,		The Read command returns the echo
		001-enabled>		canceling and noise suppression status.
		OK
		or:
		+CME ERROR: <err>
Test	ATS96=?	+CME ERROR: <err>

3-162 G24-L AT Commands Reference Manual April 15, 2008