Printek 8000 manual Select Subscript or Superscript Mode, Cancel Subscript and Superscript Mode

Epson FX Emulation

Select Subscript or Superscript Mode ESC S n

Selects subscript mode for n =1, or superscript mode for n=0. This will print characters about half the normal height, in the bottom or top half of the normal character cell.

Example: The following escape sequence will select superscript mode.

Escape Sequence:	ESC	S	0
Hexadecimal:	1B	53	30

Cancel Subscript and Superscript Mode			ESC T
Cancels subscript and superscript mode.
Escape Sequence:	ESC	T
Hexadecimal:	1B	54

Character Attributes

Select Emphasized Mode ESC E

Selects emphasized mode. This makes characters bolder by printing an extra dot to the right of each dot normally found in the character matrix. This will cut the print speed in half, but will not require an additional pass of the print head.

Escape Sequence:	ESC	E
Hexadecimal:	1B	45

Cancel Emphasized Mode		ESC F
Cancels emphasized mode.
Escape Sequence:	ESC	F
Hexadecimal:	1B	46

Select Double-Strike ModeESC G

Selects double-strike mode. This makes text bolder by printing it twice. This will cut the print speed in half, because an additional pass of the print head will be required.

Escape Sequence:	ESC	G
Hexadecimal:	1B	47

Cancel Double-Strike Mode		ESC H
Cancels double-strike mode.
Escape Sequence:	ESC	H
Hexadecimal:	1B	48

24