Fostex CR500 owner manual Adjusting display contrast, <Weak contrast>

CD-R/RW MASTER RECORDER CR500 (Preparation before using the CR500)

Adjusting display contrast

The display contrast of the unit is adjusted suitably when shipped. If you want to change the contrast, follow the procedure described below.

[DISPLAY/ CONTRAST

] key [SHIFT] key

ACCESS		MEMORY MEMORY SET			LOCATE		EXIT/NO
	1		2	3
	CONTRAST	space	ABC	DEF	EDIT TIME	PUSH
PLAY MODE					CLEAR	MENU/ENTER/YES
	FILE SEL
	4		5	6	+10
PROGRAM SET	DIR SEL	GHI	JKL	MNO
REPEAT	REC RDY
	7		8	9	0
		PQRS	TUV	WXYZ	symbol
OPEN/CLOSE		REC END
		ABS 0
	RECORD		STOP/HOME		PLAY	REWIND	F FWD
					[MENU] dial / [ENTER/YES] key

1)Press the [SHIFT] key to turn on the [SHIFT] indicator, followed by the [DISPLAY/ key.

CONTRAST ]

The popup message as shown below appears on the display and you can now adjust the display contrast.

2)While the popup message above is shown, rotate the [MENU] dial to adjust the display contrast.

Rotating the dial clockwise weakens the contrast, while rotating it counterclockwise strengthens the contrast.

<Weak contrast> <Strong contrast>

3)After adjusting the contrast, press the [ENTER/YES] key to confirm your setting.

The adjusted display contrast is now effective and the popup message above is dismissed.

<Note>: The contrast setting remains even if you turn off the power.

If you initialize the system memories from the "Sys initial Memories>" or

<"Sys Default Set>" item of the "SYS SETUP" menu in the MENU mode, the contrast is initialized to the factory preset.

22