Fostex Assigning audio data to a memory, CD-R/RWMASTER RECORDER CR500 Playback/Locate

CD-R/RW MASTER RECORDER CR500 (Playback/Locate)

Assigning audio data to a memory

The description below assumes that a BWF formatted disc on which more than one WAV file is recorded is loaded, however, it is basically also applicable to a CD-DA formatted disc.

1)Press the [PLAY MODE/ PROGRAM SET ] key until the MEMORY PLAY mode is selected.

The display shows the Home screen of the MEMORY PLAY mode. All memory banks (1 through 10) are empty by default.

You can also select the MEMORY PLAY mode to bring up this screen using the "Play Mode" item of the "PLAY SETUP" menu in the MENU mode (see page 81).

By default, the file name of the selected au- dio file is used as the “memory name”, while the start time (00m00s000ms) and end time of the audio file are set as the start time and end time of the memory entry respectively.

2)Press the [SHIFT] key to turn on the Shift mode, and specify the memory bank to which you want to assign audio data by pressing the corresponding numeric key in the [MEMORY] key group.

For example, if you press the [1/space] key, the display changes to show the setting screen for memory bank 1 (MEMORY 1).

<Note>: Before executing the save op- eration, you can edit the memory name, as well as playback start time and end time. However, in the procedure ex- ample here, we leave them as default. See the following pages for details about how to edit a memory name and the start/end time.

3)While "[TNO]" is highlighted, press the [ENTER/YES] key.

The display changes to show the audio file list screen for selecting an audio file.

4)Use the [MENU] dial to select a desired audio file and press the [ENTER/YES] key.

The display returns to the MEMORY 1 setting screen. The selected audio file is assigned to MEMORY 1 and "<SAVE>" is highlighted.

5)While "<SAVE>" is highlighted, press the [ENTER/YES] key.

The setting completes and the display returns to the Home screen on which you can see the file is assigned to MEMORY 1.

Repeat the procedure as many times as re- quired until desired audio files are assigned to memory banks. You can assign up to 10 audio files to memory banks.

In the following screen example, all memory banks (1 through 9 and 0) have audio data. With a CD-DA disc, a track number is shown in the name field.

62