Fostex CR500 owner manual Peak hold time setting Peak Hold, Aes/Ebu, S/P Dif

CD-R/RW MASTER RECORDER CR500 (MENU mode: SYSTEM SETUP menu)

Digital output signal format selection [Digital Out]

The "Digital Out" menu item selects the format (AES/EBU or S/P DIF) of the digital signal which is output from the [DIGITAL OUTPUT] connector.

Select the "Digital Out" menu item on the SYS SETUP menu screen and press the [ENTER/ YES] key. The current setting (the default is "AES/EBU") starts flashing and you can now select the desired option. Use the [MENU] dial to select between "AES/EBU" and "S/P DIF", and press the [ENTER/YES] key to confirm your setting.

AES/EBU

IEC 60958 (AES/EBU) format digital signal is output.

S/P DIF

IEC 60958 (S/P DIF) format digital signal is output.

* To exit the MENU mode, press the [STOP/HOME] key.

Peak hold time setting [Peak Hold]

The "Peak Hold" menu item sets the peak hold time of the peak level meters.

Select the "Peak Hold" menu item on the SYS SETUP menu screen and press the [ENTER/ YES] key. The current setting (the default is "3sec") starts flashing and you can now set the peak hold time. Use the [MENU] dial to select the desired time and press the [ENTER/YES] key to confirm your setting.

You can set the time between "0sec" and "9sec" in one second step.

* To exit the MENU mode, press the [STOP/HOME] key.

77