Fostex CR500 owner manual • Audio file or audio track information, Playback FS/Playback bit

CD-R/RW MASTER RECORDER CR500 (Names and functions)

• Audio file (or audio track) information

Numbers of recorded audio files (or audio tracks) are shown. The file (or track) which can be played back currently is highlighted. If no audio file (or audio track) is re- corded to the disc, all boxes are blank.

When the ALL PLAY or SINGLE PLAY mode is selected, file (track) numbers are ar- ranged from left top to right bottom in the order of recordings.

When the PROGRAM PLAY mode is selected, file (track) numbers are arranged from left top to right bottom in the order of play list registration.

• Playback FS/Playback bit

The Fs and bit information of the playback file is shown.

CD-DA (FS44.1 and BIT CDDA are shown.)

WAV file (FS and BIT information is shown as below.)

Input monitor screen (available while in record ready or recording)

The screen example below shows the screen which appears after pressing the [REC RDY] key to enter the record ready mode when a blank or additionally-recordable CD-R/RW disc is loaded and the Home screen is shown.

This screen is shown while in record ready or recording. While this screen is shown, the input monitor mode is enabled, so you can adjust the input levels when recording analog audio signals.

The input monitor screen shows the following information.

Time information

Current track

Next track

Remaining recordable time/remaining number of recordable tracks

Record mode Input selection

Channel status of digital input

• Time information

The current recorder position is shown in "m:s:ms". By default, the disc elapsed time is shown ("TOTAL" is lit on the top left of the screen).

32