Fostex CR500 Selecting a song to be played back, Method 1 Using the SKIP/CURSOR keys, Key group

MEMORY SET

CD-R/RW MASTER RECORDER CR500 (Recording)

Selecting a song to be played back

When a disc contains more than one song ("audio file" on a BWF formatted disc or "audio track" on a CD-DA disc), you can select a desired song to be played back by any of the following three methods.

<Method 1>: Using the [SKIP/CURSOR ] keys

If you press the [SKIP/CURSOR ] or [SKIP/CURSOR ] key, the following popup screen appears, and the recorder skips to the beginning of the current/previous or next song and stops. You can locate the desired track by pressing the appropriate key as many times as required.

SKIP/CURSOR

<Note>: You can execute the operation above while stopped or during playback. If you execute the operation during playback, the recorder automatically starts playback after locating the specified song. If you enable the repeat function (by using the [REPEAT] key or the "PLAY SETUP" menu in the MENU mode), the recorder repeats playback.

<Method 2>: Using the [MEMORY/

MEMORY SET

] key group

By specifying the file (track) number of a song using a key in the [MEMORY/] key group, the recorder locates the beginning of the song. To specify a song whose number is two-digit, use the [CLEAR/+10] key to specify the tens digit and then press an appropriate key among the [0] through [9] keys (see the entry examples below).

[MEMORY/

MEMORY SET

		MEMORY MEMORY SET
	1	2	3
	space	ABC	DEF
] key group	4	5	6
	GHI	JKL	MNO
	7	8	9
	PQRS	TUV	WXYZ

CLEAR

+10

0

symbol

[CLEAR/+10] key

<Note>: You can execute the operation above while stopped or during playback. The recorder automatically starts playback of the specified song. If you enable the repeat function (by using the [REPEAT] key or the "PLAY SETUP" menu in the MENU mode), the recorder repeats playback.

How to use the [CLEAR/+10] key

If you press the [CLEAR/+10] key once, the popup screen below left appears. High- lighted "1-" indicates the tens digit is "1". If you press the [CLEAR/+10] key again, highlighted "1-" changes to "2-", indicating that the tens digit is "2". That is, pressing the [CLEAR/+10] key increments the tens digit number.

<When you press the [CLEAR/+10] key once> <When you press the [CLEAR/+10] key twice>

For example, to select track 15, press the [CLEAR/+10] key once, followed by the [5/ JKL] key in the [MEMORY/ MEMORY SET ] key group. To select track 24, press the [CLEAR/ +10] key twice, followed by the [4/GHI] key in the [MEMORY/ MEMORY SET ] key group.

50