Fostex CR500 owner manual Initializing system memory data Sys Default Set

CD-R/RW MASTER RECORDER CR500 (MENU mode: SYSTEM SETUP menu)

Initializing system memory data [Sys Default Set]

Using the "Sys Default Set " menu item, you can initialize the setup data (including SYS SETUP data, PLAY SETUP data and contrast level) to the factory preset data.

Select "Sys Default Set " on the SYS SETUP menu screen and press the [ENTER/YES] key. The display changes to show the confirmation screen (where "?" of "Are you sure?" flashes).

Pressing the [ENTER/YES] key initializes the setup data, and the display returns to the previous screen. To cancel the initialization, press the [EXIT/NO] key.

<Note>: The following setup data is initialized.

* SYS SETUP:	(1) "File Name Mode" setting		(2)	"Select Input" setting
	(3)	"Peak Hold Time" setting	(4)	"Ref.Level" setting
	(5)	"Keyboard Sel" setting	(6)	"Digital Out" setting
* PLAY SETUP:	(1)	"Play Mode" setting	(2)	"Repeat" setting
	(3)	"Auto Play" setting	(4)	"Power On Play" setting
* Contrast level	* User memory data

* To exit the MENU mode, press the [STOP/HOME] key.

Initializing flash memory [Sys Initial Memory]

Using the "Sys Initial Memory " menu item, you can initialize the flash memory data (including all system memory data, the play list for program play and the memory play data) to the factory preset data.

Select "Sys Initial Memory " on the SYS SETUP menu screen and press the [ENTER/YES] key. The display changes to show the confirmation screen (where "?" of "Are you sure?" flashes).

Press the [ENTER/YES] key holding down the [RECORD] key, initializes the flash memory, and the display returns to the previous screen. To cancel the initialization, press the [EXIT/ NO] key.

<Note>: The following setup data is initialized.

* SYS SETUP:	(1) "File Name Mode" setting		(2)	"Select Input" setting
	(3)	"Peak Hold Time" setting	(4)	"Ref.Level" setting
	(5)	"Keyboard Sel" setting	(6)	"Digital Out" setting
* PLAY SETUP:	(1)	"Play Mode" setting	(2)	"Repeat" setting
	(3)	"Auto Play" setting	(4)	"Power On Play" setting
* Memory play data	* Play list for program play		* Contrast level		* User memory data

* To exit the MENU mode, press the [STOP/HOME] key.

80