Fostex CR500 Saving SYS SETUP data Sys User Save, Loading SYS SETUP data Sys User Load

CD-R/RW MASTER RECORDER CR500 (MENU mode: SYSTEM SETUP menu)

Saving SYS SETUP data [Sys User Save]

Using the "Sys User Save " menu item, you can save the current setup data (including SYS SETUP data, PLAY SETUP data and contrast level) to the user memory. The saved setup data can be loaded using the "Sys User Load" menu item (see below for details) at any time.

Select "Sys User Save " on the SYS SETUP menu screen and press the [ENTER/YES] key. The display changes to show the confirmation screen (where "?" of "Are you sure?" flashes).

To save SYS SETUP/PLAY SETUP data, press the [ENTER/YES] key. To cancel the operation, press the [EXIT/NO] key.

<Note>: The following setup data is saved to the user memory.

* SYS SETUP:	(1)	File name mode	(2)	Select input	(3)	Peak hold time
	(4)	Ref.level	(5)	Keyboard sel	(6)	Digital out
* PLAY SETUP:	(1) Play mode		(2) Repeat		(3) Auto play
	(4)	Power on play

*Contrast level

*To exit the MENU mode, press the [STOP/HOME] key.

Loading SYS SETUP data [Sys User Load]

Using the "Sys User Load " menu item, you can load the setup data (including SYS SETUP data, PLAY SETUP data and contrast level) from the user memory.

Select "Sys User Load " on the SYS SETUP menu screen and press the [ENTER/YES] key. The display changes to show the confirmation screen (where "?" of "Are you sure?" flashes).

To load the setup data, press the [ENTER/YES] key. To cancel the operation, press the [EXIT/NO] key.

<Note>: If you execute “Sys Default Set” (Initializing system memory data) or “Sys Initial Memory” (Initializing flash memory), the setup data is initialized.

Therefore, even though you execute “Sys User Load”, you cannot load the setup data you saved.

* To exit the MENU mode, press the [STOP/HOME] key.

79