Fostex CR500 main specifications, Inputs/Outputs, ANALOG INPUT L, R balanced, Phones

CD-R/RW MASTER RECORDER CR500 (Specifications)

CR500 main specifications

Inputs/Outputs

* 0dBu = 0.775Vrms, 0dBV = 1Vrms

Reference level: -12dBFS/-20dBFS (default: -12dBFS, selectable in the “Ref.Level” menu item of the SYS

SETUP menu)

ANALOG INPUT L, R (balanced)

Connector	: XLR-3-31 type (balanced, pin-2: hot)
Input impedance	:	10kΩ or higher
Reference input level	:	+4dBu
Maximum input level	:	+24dBu (-20dBFS)

ANALOG INPUT L, R (unbalanced)

Connector	:	RCA pin jack
Input impedance	:	10kΩ or higher
Reference input level	:	-10dBV
Maximum input level	:	+10dBV (-20dBFS)

ANALOG OUTPUT L, R (balanced)

Connector

Output load impedance Reference output level Maximum output level

:XLR-3-32 type (balanced, pin-2: hot)

:10kΩ or higher

:+4dBu

:+24dBu (-20dBFS)

ANALOG OUTPUT L, R (unbalanced)

Connector

Output load impedance Reference output level Maximum output level

:RCA pin jack

:10kΩ or higher

:-10dBV

:+10dBV (-20dBFS)

PHONES

Connector	: ø6mm Stereo Phone jack
Output load impedance	:	8Ω or higher
Maximum output level	:	100mW (32Ω)

DIGITAL INPUT

Connector	:	XLR-3-31 type (balanced, pin-2: hot)
Format	:	IEC 60958 (S/P DIF) or IEC 60958 (AES/EBU), auto
		selection.

DIGITAL OUTPUT

Connector	:	XLR-3-32 type (balanced, pin-2: hot)
Format	:	IEC 60958 (S/P DIF) or IEC 60958 (AES/EBU),
		The format of an output signal is selected in the “Digital
		Out” menu item of the SYS SETUP menu.

USB (USB keyboard Only)

Connector	: USB series “A” receptacle
	The keyboard uses Default Scan Code 2.

GPI (Fader Start)

Connector : ø6mm Phone jack

94