Fostex CR500 CD-DAdefault : 44.1kHz/16Bit, BWF 44.1/16 : 44.1kHz/16Bit, BWF 44.1/24 44.1kHz/24Bit

CD-R/RW MASTER RECORDER CR500 (MENU mode: DISK UTILITY menu)

7)Use the [MENU] dial to highlight "Audio format type" and press the [ENTER/YES] key.

The currently selected format type (the default is "CD-DA") flashes and you can now select the format type.

You can select a format type from among "CD-DA" and the various "BWF" types (see the table below).

CD-DA (default) : 44.1kHz/16Bit

BWF (44.1/16) : 44.1kHz/16Bit

BWF (44.1/24) : 44.1kHz/24Bit

BWF (48/16) : 48kHz/16Bit

BWF (48/24) : 48kHz/24Bit

BWF (88.2/24) : 88.2kHz/24Bit

BWF (96/24) : 96kHz/24Bit

8)Use the [MENU] dial to select the desired type and press the [ENTER/YES] key to confirm your selection.

9)Use the [MENU] dial to highlight "[EXECUTE]" and press the [ENTER/YES] key. (To cancel formatting, highlight "[EXIT]" instead of "[EXECUTE]".)

The display shows the "CAUTION" screen as below, on which "Are you sure?" flashes. To cancel formatting, press the [EXIT/NO] key.

flashing

10)Press the [ENTER/YES] key to start formatting the disc.

When you select any of the BWF types in step 8) above, the unit erases data before formatting the disc as shown in the screens below. When you select "CD-DA" in step 8) above, the unit only erases data.

When formatting (or erasing) completes, the display shows "Completed", while the unit exits the MENU mode. The display returns to the Home screen.

<Note>: To reformat a formatted disc with the different format type, execute the same procedure as above.

87